 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Freescale Semiconductor, Inc. Addendum MPC860UMAD Rev. 2.4, 4/2004 Errata to the MPC860 PowerQUICCTM Family User's Manual, Rev. 2 Freescale Semiconductor, Inc... This errata describes corrections to Revision 2 of the MPC860 PowerQUICCTM Family User's Manual (Order No. MPC860UM, Rev. 2). The MPC860 is a PowerPCTM architecture-based quad integrated communications controller (PowerQUICCTM). The CPU on the MPC860 is the MPC8xx core, a 32-bit microprocessor that implements the PowerPC architecture, incorporating memory management units (MMUs) and instruction and data caches. 1 . Document Revision History Table 1. Document Revision History Rev. No. 2.2 Substantive Change(s) Added new errata items from Section 12.5 (page 12-27), Section 27.8 (page 27-13, 27-14), Section 27.22 (page 27-29), Section 31.4.1.2 (page 30-9, 30-10), and Section 34.2.1 (page 34-4). Added new errata item from Section 32.4.3 (page 32-8). Added new errata items for Section 22 (page 22-1), Section 22.16 (page 22-15), Section 31.4.1.2 (page 30-9), and Section B.3.1 (page B-4) Table 1 provides a revision history for this document. 2.3 2.4 2 Document Errata Changes In the second row of Table 12-5, add a footnote at the end of the sentence that states: At power-on reset, port pin states are not defined in any particular state until CLKOUT is present for two clocks. The section and page numbers of new errata items added since the last errata addendum are boldfaced. Section/Page 12.5, 12-27 22, 22-1 22.16, 22-15 The last sentence in the last paragraph should be removed. In the RZS field (bit 7) of Table 22-9, for selection 1, the second sentence in the paragraph (making reference to V.14 applications) should be removed. For More Information On This Product, Go to: www.freescale.com Freescale Semiconductor, Inc. Section, Page No. 27.8, 27-13 27.8, 27-14 Changes Add superscript number 2 after PADDR1_H, PADDR1_M, and PADDR1_L. Add superscript number 2 after TADDR_H, TADDR_M, and TADDR_L. At the end of Table 27-1, add a note with the following statement: The address should be written in little endian, not Motorola's big-endian format (that is, physical address 112233445566 should be written PADDR_L = 6655, PADDR_M = 4433, and PADDR_H = 2211. The TADDR should be written in the same way as the PADDR). 27.22, 27-29 30.4.1.2, 30-9 Change the last sentence in step 26 to read, "Then write 0x000E to TxBD[Data..." In the last sentence of example 1, change the order of the string for REV = 1 to the following: first j_klmn__r_stuv last Also, on all three examples, tab last and lsb to the right so that they do not appear to be part of the string. 30.4.1.2, 30-10 In the last sentence of example 3, change the order of the string for REV = 1 to the following: first 32.4.3, 32-8 r_stuv_ghij_klmn last In Table 31-3, replace the text in the description with the following: Division ratio 0-7. Specifies the divide ratio of the BRG divider in the I2C clock generator. The output of the prescalar is divided by 2 x (DIV + 3 + (2 x FLT)), and the clock has a 50% duty cycle. The FLT bit is in the I2MOD register. The minimum value for DIV is 3 if the digital filter is disabled (FLT = 0) and 6 if the digital filter is enabled (FLT = 1). 33.1, 33-2 Add a footnote reference number at the end of the statement of the sixth bullet with the following footnote: At power-on reset, port pin states are not defined in any particular state until CLKOUT is present for two clocks. 34.2.1, 34-4 43.2.12, 43-10 B.3.1, B-4 The first bullet should reference SPS = 0, and the second bullet should reference SPS = 1. Change the term `60x' in the first and fourth sentences to `external.' In Table B-1, the row making reference to SCC in Profibus (seventeenth row) should be removed. Freescale Semiconductor, Inc... 2 Errata to the MPC860 PowerQUICCTM Family User's Manual, Rev. 2 MOTOROLA For More Information On This Product, Go to: www.freescale.com Freescale Semiconductor, Inc. Section, Page No. Changes THIS PAGE INTENTIONALLY LEFT BLANK Freescale Semiconductor, Inc... MOTOROLA Errata to the MPC860 PowerQUICCTM Family User's Manual, Rev. 2 3 For More Information On This Product, Go to: www.freescale.com Freescale Semiconductor, Inc. HOW TO REACH US: USA/EUROPE/LOCATIONS NOT LISTED: Motorola Literature Distribution P.O. Box 5405, Denver, Colorado 80217 1-480-768-2130 (800) 521-6274 JAPAN: Motorola Japan Ltd. SPS, Technical Information Center 3-20-1, Minami-Azabu Minato-ku Tokyo 106-8573 Japan 81-3-3440-3569 Information in this document is provided solely to enable system and software implementers to use Motorola products. There are no express or implied copyright licenses granted hereunder to design or fabricate any integrated circuits or integrated circuits based on the information in this document. Motorola reserves the right to make changes without further notice to any products herein. Motorola makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does Motorola assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without Freescale Semiconductor, Inc... ASIA/PACIFIC: Motorola Semiconductors H.K. Ltd. Silicon Harbour Centre, 2 Dai King Street Tai Po Industrial Estate, Tai Po, N.T., Hong Kong 852-26668334 TECHNICAL INFORMATION CENTER: (800) 521-6274 HOME PAGE: www.motorola.com/semiconductors limitation consequential or incidental damages. "Typical" parameters which may be provided in Motorola data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. Motorola does not convey any license under its patent rights nor the rights of others. Motorola products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the Motorola product could create a situation where personal injury or death may occur. Should Buyer purchase or use Motorola products for any such unintended or unauthorized application, Buyer shall indemnify and hold Motorola and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that Motorola was negligent regarding the design or manufacture of the part. Motorola and the Stylized M Logo are registered in the U.S. Patent and Trademark Office. digital dna is a trademark of Motorola, Inc. The described product contains a PowerPC processor core. The PowerPC name is a trademark of IBM Corp. and used under license. All other product or service names are the property of their respective owners. Motorola, Inc. is an Equal Opportunity/Affirmative Action Employer. (c) Motorola, Inc. 2004 MPC860UMAD For More Information On This Product, Go to: www.freescale.com |
Price & Availability of MPC860UM
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |